EvoScan Technical Solutions to common problems PDF Print E-mail


Issue: When logging by EvoScan, I have a problem with LC-1 values.
It seems that every values lose the place by ten in the integer part.

For example:
(right value)14.7 -> (logged value)4.7
(right value)12.1 -> (logged value)2.1

I have the Logworks 3.04 and it logs right values.

Solution:
logworks is faulty, and does not use the lambda multiplier.  use "LM programmer" and ensure you have the lm programmer set to gasoline for the lambda multiplier, and that you have done a free air calibration.
Last Updated on Wednesday, 05 May 2010 10:04
 
Copyright 2009 (c) Limitless Designs LLC.