Reflashing 2004-2006 Mitsubishi Outlander MH8202F PDF Print E-mail


Reflashing your 2004-2006 Mitsubishi Outlander MH8202F ECU

• Reflashable Read/Write by using MMCFlash "Module2-Mitsubishi" <- BUY HERE

• Vehicles also using this reflashing method are
- 2004 Mitsubishi Outlander
- 2005 Mitsubishi Outlander
- 2005 Mitsubishi Outlander Turbo EDM (2005_Mitsubishi_OutlanderTurbo_EDM_MT_C7280009.hex)
- 2006 Mitsubishi Outlander

22 June 2012 Update:  MMCFLASH now supports Mitsubishi Outlander Checksum Fix

Outlander was a unique mitsubishi anniversary edition from 2004-2006.
This webpage does not apply to Mitsubishi Airtrek, because the Airtrek has an Evo8 ecu.

• In MMCFlash select "MH8202F [512K] k-Line"
Outlander_ECU_Pins_pinout

Wiring the openport 2.0 cable directly to the ECU for use with MMCFlash

Outlander
ECU Pin
OpenPort 2.0 Cable12v-15v Power Supply (use a Laptop Power supply if you like, check the voltage)Description
pin 33
pin 4 and/or pin 5 Negative / Ground (-) Vehicle Chassis / Battery Terminal (-)
pin 132
pin 16 +12v (Battery Voltage)
Battery Backup (Direct 12v)
pin 34
pin 16 +12v (Battery Voltage) Power Supply (comes from MFI Relay) MFI Relay switched on by ecu
pin 50
pin 51
pin 58
pin 16 +12v (Battery Voltage) Ignition Switch (comes from IG1 Relay) IG1 switched on by key switch.
pin 83

Mitsubishi Op2.0
reflash adapter pin

Reflash init line
Reflash Init. Voltage from ext. mitsi reflash connector on the OpenPort 2.0 cable.

Speaker jack "tip"

pin83 from the ecu also feeds through to the 12pin plug under the dash board. So just connect it to the 12pin openport 2.0 single reflash wire.

pin 14 CAN High (not needed for mmcflash)

pin 6 CAN Low (not needed for mmcflash)
pin 74

pin 7

K Line K Line Data (used for mmcflash)




Read ROM:
step1. plug in openport 2.0 cable.
step2. plug in mmcflash usb dongle
step3. select "MH8202F[512K]"
step4. press Read
evoscan-mmcflash-mh8302F

Flash ROM:
step1. plug in openport 2.0 cable.
step2. plug in mmcflash usb dongle
step3. select "MH8202F[512K]"
step4. open rom file.
step5. press checksum if button is not greyed (this edits the checksum in memory only, not the file on disk)
step6. press Write, to update the Vehicle ECU (Ensure full battery, or on a battery charger) k-line reflash is recoverable (restartable) anyway after bricked.

Anybody can edit the roms files for free.. just grab a copy of ECUFLASH from
www.evoscan.com/free-ecu-rom-downloads

Also grab the new opensource Outlander ECU ROM table XML definitions for free from here, or from the files below.
www.evoscan.com/roms/mitsubishi

Read the tuning guides to get a feel for where to place the xml files, and easy tuning vehicles etc.
HOWTO Guides on ECU REFLASHING (EvoScan Tech Info Section - Understanding EFI Systems)
http://www.evoscan.com/ecu-mods


You can edit Rev Limiter,  Speed Limiter, Stationary Rev Limiter.. etc.

And you too can edit/tune the tables for free for Outlander like the screenshot posted here.
ECUFlash MMCFLASH Mitsubishi Outlander EDM


Most rom files are on this ROMs database:

www.evoscan.com/roms/mitsubishi

{jsmallfib [roms/outlanderxml] [62:5] [91:5] [g0:2] desc(Got an EcuFlash XML file for this? Please post it here:)}


Mitsubishi Outlander ECU MH8202F
2005_Mitsubishi_Outlander_MH8202F

Pin# Connection Pin# Connection
1
10 -
2
11 -
3
12 -
4
13 -
5
14
6
15
7
16 -
8 - 17 -
9 - 18 -
Pin# Connection Pin# Connection
21
33 -
22 - 34
23
35 -
24 - 36
25
37 -
26
38
27
39
28 - 40 -
29
41
30
42
31 - 43
32
Pin# Connection Pin# Connection
51
67
52
68 -
53
69 -
54
70
55
71 -
56
72 -
57
73
58 - 74
59 - 75 -
60 - 76 -
61
77
62 - 78
63 - 79
64
80
65
81
66
82
83
Pin# Connection Pin# Connection
91
103
92
104
93
105
94
106
95 - 107
96
108
97
109
98
110
99
111
100 - 112
101 - 113 -
102
Pin# Connection Pin# Connection
121 - 138
122 139
123 140
124 141
125 142
126 143
127 144
128 145
129 146
130 147
131 148
132 149
133 150
134 151
135 152
136
153
137 -

 

Last Updated on Thursday, 21 June 2012 23:41
 
Copyright 2009 (c) Limitless Designs LLC.